DIY Window Wear



A few readers had questions about how we made the DIY kitchen window treatments shown here in my Oh No-ing to Glowing Kitchen reveal post. Here is a short summary of how we used extra materials from our remodeling projects to make pelmet box style custom window treatments out of leftover wood and fabric.


The materials used for the small window were pieces of beadboard that we had left from the kitchen cabinet trim. The larger window over our sliding door required a more sturdy material to ensure it would be rigid and for that we used MDF. You could use a less sturdy material to construct similar window boxes but for a family that moves as often as we do, they needed to be able to withstand being handled if we wanted to keep them!



If you don't have anything at home that you can use, you will need the following materials:
  • (1) eight foot long 1 X 4
  • (1) 1/8 inch thick sheet MDF
  • Batting (This helps make the edges rounded and will help disguise whatever material you use for the frame)
  • Fabric (I had nearly seven yards but for both windows needed about five)
  • Brad nailer and Staple gun
  • (2) Hanging hardware eyelets
The photos below are of the beadboard but the concept is the same if you are using the MDF.



Step 1 Construct the frame using the 1 x 4 (The width will depend on how far out from each side of window you want to extend)
Step 2 Cut and attach the MDF (Beadboard shown here) with construction adhesive or a brad/finishing nailer
Step 3 Attach the eyelet for hanging onto both ends of the 1 x 4 frame
After constructing the frame, cover completely with batting. We stapled it right to the center board on the back. Then do the same with your fabric, trimming it, pulling it tightly and tucking it under itself as you go. I wrapped the corners like you would with wrapping paper on the sides of a package.

The eyelets will be covered now so use a razor blade to trim the fabric around them and uncover them. You could also try to attach the eyelet after covering the frame but it will be tougher to go through the layers of batting and fabric. 


The fabric I chose has a pattern that is tricky to line up so depending on your fabric choice, be mindful of how the fabric looks on top when you are stapling to the underside!
For the window over our sink the cabinets on either side are close and didn't allow much room so the box is close to the window fame.


For the large window we made the box extend past the window frame two inches on each side and hung it several inches above the window to give the illusion of more height. There is a curtain rod with two white panels hanging behind it.



I purchased seven yards of fabric and covered two window boxes, two barstools, and still have extra so depending on how large your windows are you may be able to get by with much less. Our small window box is 20 X 41 and the large is about 16 X 80.



Happy window styling!



23 comments:

  1. Beautiful! I really like the fabric. Perfect contrast to the rest of the room. Love that they match the stools. Fantastic work! :D

    ReplyDelete
  2. You did such a great job, they look very professionally done. good job. Love the fabric you used also. Great tutorial also.

    ReplyDelete
  3. Gorgeous! I love the print and color of the material you chose...goes perfect in your kitchen! Thanks for sharing! Have a nice evening!
    Selene @ Restoration Beauty

    ReplyDelete
  4. So beautiful! And great tutorial! They look very elegant. I have a new weekly link party which is live now and I would love if you stop by and link up this wonderful post! Hope to see you there! http://mariaelenasdecor.blogspot.com/ Hugs, Maria

    ReplyDelete
  5. Looks so beautiful! Your fabric choice is just perfect. Thanks for sharing this tutorial. ;)

    ReplyDelete
  6. These are sooo pretty.. Love the fabric you chose.. and I may have to enlist the hubs to make me some too! Black and white kitchens are my favorite, I have one too~
    xoxo
    Amie @ Pinkapotamus

    ReplyDelete
  7. Such a gorgeous idea! It's funny, we sell roman shades and drapes in an almost identical fabric (http://blnds.cm/U8JSte). Everyone in our office has been obsessing over them for the past few weeks, but turning it into a pelmet is adorable. We'll definitely be sharing this post with our followers on facebook.

    ReplyDelete
    Replies
    1. Thanks! I am so glad that I went with this fabric. I don't see myself getting sick of this pattern compared to some of the more trendy patterns I had considered. Thanks for sharing the link in case I ever need to find more of it,
      Kate

      Delete
  8. This looks seriously awesome, Kate! What a difference!

    ReplyDelete
  9. Love those window boxes! Thanks for visiting me, I'm following now via Bloglovin:)

    lifealittlebrighter.com

    ReplyDelete
  10. Beautiful! I love the fabric you chose. Thank you for linking up at our Simply Create Link party!!

    ReplyDelete
  11. They look amazing! I think it's time to put my hubby to work! I'd love for you to come share this at our Pinteresting Party!

    ReplyDelete
  12. These look amazing! I love the fabric you chose. The graphic design is beautiful.

    This is a fantastic project! Would you consider linking this up at my Pinworthy Projects Party? I hope to see you there!

    ReplyDelete
  13. I am in LOVE with your kitchen! I love the white cabinets - and the black and white window treatment fabric really pops against the gray walls. The window treatment over the sliding glass doors really adds an elegant touch. We have them in our kitchen as well, and after getting rid of some really dated vertical blinds, I was looking for something to dress them up a bit - as I think they are a real sore spot for the eyes in my kitchen. Thanks for the great ideas.

    ReplyDelete
  14. Great work! The windows look so different now. It also makes the room elegant. :)

    ReplyDelete
  15. i impressed by the quality of information on this website. there are a lot of good resource here. i am sure i will visit this place again soon. Gutter Installation

    ReplyDelete
  16. Looks so beautiful! Your fabric choice is just perfect. Thanks for sharing this tutorial. ;)
    window treatments

    ReplyDelete
  17. Ampro is that mainly makes high end and heavy-duty power tools. Although, its brad nailer can be a great option for consumers as well. www. Nailershub .com

    ReplyDelete
  18. In the event that you don't have the cash for the plastic, you can likewise utilize bubble wrap as a viable substitution. You can apply to bubble side of the wrap against the glass of the windows with twofold sided tape to make sure about set up. Lofts

    ReplyDelete
  19. On the off chance that you are burnt out on managing old windows, you can generally have new ones supplanted by a neighborhood window contractual worker. Spending Friendly Ways to Deal with Drafty Windows in Your Home . Attic windows

    ReplyDelete
  20. What a creative and beneficial project your did here for us particularly for your new readers like me and also your regular fans and followers. The window with cover look funny and beautiful. Thanks for stating the whole procedures you followed to bright the final finish. Anyway. get new replacement windows in Aurora if you are looking for a replacement service.

    ReplyDelete
  21. Fantastic work, I really like it and keep it up :)

    Thanks
    Flooring Store in Oshawa

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...